1

1

SERIE 30 IP67 INOX


HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR HEAVY DUTY INDUSTRIAL APPLICATIONS

  • Resolution up to 50.000 pulses per turn
  • External diameter 90 mm
  • Shaft Ø 12 mm
  • Protection class IP67 according to DIN EN 60529
  • Executions mechanical, electronic and special optics forms available on request
  • Connection by cable (other cable lenght available)

 

 
MECHANICAL SPECIFICATIONS
Materials Cover: Stainless Steel AISI304
Housing: Stainless Steel AISI304
Shaft: Stainless Steel AISI304
Bearings Ballraces
Bearings lifetime 1×1010 rev.
Maximum number of revolutions permitted mechanically 6000 rpm
Protection against dust and splashes according to DIN EN 60529 IP67
Rotor inertia moment 270 gcm2
Starting torque at 20ºC (68ºF) ≤ 0,05 Nm
Maximum load permitted on axial shaft 80 N
Maximum load permitted on radial shaft 100 N
Weight aprox. 1,2 Kg
Operating temperature range -20ºC a +80ºC – Standard
-40ºC a +80ºC – Special Customer FT00
Vibration 100 m/s2 (10Hz…2000Hz)
Shock 1000 m/s2 (6ms)
Maximum pulses per turn 50.000
Axial connection 2 meters cable (other cable lenghts available or connector mounted at the end of the cable, upon request)

 
OUTPUT SIGNALS
OUTPUT CIRCUIT NPN Open Collector RS422 (TTL compatible) RS422 (TTL compatible) Push-Pull Differential
Power supply 11…30 VDC 11…30 VDC 5 VDC ±5% 11…30 VDC
Output voltage 11…30 VDC 5 VDC 5 VDC 11…30 VDC
Consumption 40 mA Tipical: 80 mA
Max: 160 mA		 Tipical: 70 mA
Max: 150 mA		 Tipical: 45 mA
Max: 150 mA
Max. load capability / channel 40 mA ±20 mA ±20 mA ±30 mA
Lenght of cable allowed 50 m (24 VDC) 1200 m 1200 m 100 m
“Low” signal level VOL < 0.4 VDC (24 VDC) VOL < 0.5 VDC VOL < 0.5 VDC VOL < 2.5 VDC
“High” signal level VOH > 22 VDC (24 VDC) VOH > 2.5 VDC VOH > 2.5 VDC VOH > VCC – 3 VDC
Frequency 100 kHz 300 kHz 300 kHz 200 kHz
Short circuit protection Not permanent Yes Yes Yes
Protection polarity inversion Yes Yes No Yes
Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise